Brimpex Logo
Brimpex Logo

Aircraft Safety Lighting

WOLF LED Floodlite

WOLF LED Floodlite


The WF-300 Wolf ATEX LED Floodlite is a high performance, lightweight, portable floodlight for use in temporary applications and installations in potentially explosive atmospheres. Using an array of high output, high efficiency LEDs, it gives an excellent flood of brilliant white light.

The LED Floodlite is CE marked to the ATEX Directive and IECEx Certified, for safe use in Zone 1 potentially explosive gas and Zone 21 explosive dust atmospheres, where a T4 temperature class permits.

Delivering an impressive flood of brilliant white light from an array of 48 high power LEDs, the WF-300 LED Floodlite has an output of 3,300 lumens, equivalent to a 200w halogen incandescent lamp, but because of the far greater efficiency, it has significantly lower power consumption at 58 watts. One benefit of this is that the unit runs at a much lower temperature, eliminating the risk of burns when handling.

Technical Specification

Wolf ATEX LED Floodlite
58W medium or flood beam (approx 100°)
Peak Luminous Intensity at 5m 341 lux

WOLF LED Flootlite


Product reference WF-300
Product description
ATEX LED Floodlite
Code II 2 GD Ex emb IIC T4 Gb
Ex t IIIC T103°C Db IP66/67 (Tamb= 50°C)
Equipment Category
Type of protection
  "e" increased safety, 'mb' encapsulation,
't' enclosure protection
Area of classification (Gases) Zones 1 and 2, Gas Groups IIA, IIB and IIC
Temp. classification T4
Area of Classification (Dusts)
Zones 21 and 22, Dust Groups IIIA, IIIB and IIIC
Max surface temp (Dusts)
Ambient temperature -20°C to +50°C
Enclosure Marine grade aluminium alloy, epoxy powder coated
Lens Polycarbonate
Beam Type
Medium Flood / Wide Flood
Light source:   Type
48 x white high power LEDs
Life 100,000+ hours
Power 58W
Output 3300 lm
24V AC/DC +/- 10%
100-254V AC +/- 10%
Weight 9.0kg (excluding cable)
Ingress protection IP66/67
Wolf ATEX Floodlite supplied with bridle and lamp stand for fitting to:
Magnet Set WF-696
Tripod stand LL-680

All information has been gathered under laboratory conditions, the user must regard the values given as approximate Changes may be made to the above specification without notification, details are available on request.